1. Steklomed LLC — Russian Manufacturer of Microscope Slides and Cover Glass
Country: Russia
Business role: Microscope slide and cover glass manufacturer
Steklomed identifies its business as the production of microscope slides and cover glass and publishes an address in Klin, Moscow Region. Its website lists 26 × 76 mm slides with thickness ranges of 0.8–0.9 mm and 1.8–2.0 mm.
The company also describes batch documentation under its technical specifications and invites inquiries about dimensions and glass requirements.
Why consider it: Steklomed provides a direct producer contact for buyers comparing a Russian manufacturing option. Its published thickness alternatives make a detailed specification particularly important.
What to confirm: Request the current drawing or datasheet, thickness tolerance, edge finish, marking-area options and packing. Ask whether the proposed model is intended for the laboratory’s actual preparation and equipment. Do not infer an adhesive coating or automated-instrument compatibility from a dimensional listing alone.
2. MiniMed — Russian Laboratory Glassware Supplier with Defined MiniLab Slide References
Country: Russia
Business role: Laboratory glassware company and catalog supplier
MiniMed’s slide catalog lists MiniLab products with individual article numbers. Two examples show why buyers should order by the complete reference:
12003421 / SP-7105 (СП-7105): Listed as 26 × 76 mm, 1.0 mm thick, with ground edges and a writing strip; packing is shown as 72/3,600 pieces.
12003405 / SO-4 (СО-4): Listed as 26 × 76 × 2 mm, with ground edges and a writing strip; packing is shown as 50/2,500 pieces. minimed.ru
Why consider it: The catalog provides a practical route for comparing named MiniLab models and requesting a quotation tied to a specific article number.
What to confirm: Establish the manufacturer and origin of the selected reference, distinguish inner-box from outer-carton quantities, and match the thickness to the laboratory’s requirements. Treat the complete model, dimensions and finish as the purchasing specification.
3. DIA-M — Multibrand Laboratory Distributor for Standard and Charged Slides
Country: Russia
Business role: Laboratory equipment and consumables distributor
DIA-M’s microscope slide category presents multiple brands, dimensions and surface configurations. Its listings distinguish products with marking areas from products with adhesion-oriented treatments.
One example is an ABclonal entry, AI09101уп, described as a 25 × 75 × 1 mm positively charged slide with a white marking area and 50 slides per pack. Диаэм
Why consider it: A multibrand catalog can help procurement teams compare a defined slide specification and request alternatives for laboratory evaluation.
What to confirm: Obtain the exact manufacturer’s datasheet and proposed catalog number. For charged or adhesive slides, evaluate specimen retention, staining performance and instrument compatibility in the intended workflow. A catalog category containing several brands does not establish identical coatings or interchangeable performance.
4. Apexlab — Russian Purchasing Channel for Imported Laboratory Slides
Country: Russia
Business role: Laboratory supplier, importer and distributor
Apexlab supplies laboratory equipment and consumables through a Russian sales channel. Its product page for a 7105 marking-area slide states 75 × 25 mm dimensions, 1.1 mm thickness and 72 slides per pack. The same page identifies China as the country of origin. apexlab.ru
This is a useful example of a product sold by a Russian business whose manufacturing origin is overseas.
Why consider it: Apexlab may suit buyers seeking a defined routine slide through a local purchasing channel alongside other laboratory supplies.
What to confirm: Specify the exact product page or reference, packing, edge finish and identification area. The catalog also contains thicker products carrying similar numerical model descriptions, so a request for “7105 slides” alone is insufficient.
5. Yancheng Chuangxin Medlab Co., Ltd. — China-Based Manufacturer for Bulk and OEM Slide Projects
Country: China
Business role: Microscope slide and cover glass manufacturer and exporter
Yancheng Chuangxin Medlab Co., Ltd. offers a factory sourcing option for laboratory distributors, importers and private-label buyers. For a Russia-bound project, send a written specification so the proposed model and commercial arrangements can be confirmed for the order.
Our published microscope slide range includes:
Plain microscope slides, 7101/7102, with ground-edge and cut-edge options.
Frosted microscope slides, 7105/7107, with specimen-identification areas.
Color-frosted microscope slides, 7109, for marking and laboratory organization.
Positively charged microscope slides, SC1, for specified specimen-attachment requirements.
Adhesive microscope slides, SC2, for applications requiring enhanced retention.
Published nominal sizes include 25 × 75 mm, 25.4 × 76.2 mm and 26 × 76 mm. Custom specifications and OEM or private-label packaging are available on request. Chuangxin Medlab
Why consider us: Factory discussions can help define the slide, surface treatment, marking area and packaging as one repeat-order specification.
What to confirm: Ask for evaluation samples, the current MOQ, production lead time, protective packing and a destination-specific quotation. Confirm the shipping and payment terms for the proposed transaction before order approval.
6. Optimum-Lab — Laboratory Supplier for Flat and Cavity Slide Formats
Country: Russia
Business role: Laboratory equipment and consumables supply channel
Optimum-Lab’s slide category includes conventional flat slides, marking-area products, colored options and cavity formats. Published examples include SP-7103 with one well and SP-7104 with two wells, described at approximately 76 × 26 mm with 1.0 ± 0.1 mm thickness.
The same category also lists approximately 2 mm SO-series products, reinforcing the need to distinguish format and thickness. optimum-lab.ru
Why consider it: Buyers can compare general microscopy slides with cavity formats through one laboratory catalog.
What to confirm: Request the manufacturer, exact reference, cavity arrangement where relevant, dimensional tolerances and pack quantity. A cavity slide is a particular preparation format and should not be treated as a substitute for a flat histology slide without checking the intended method.
Reference: Optimum-Lab microscope slide category
Russian Manufacturer, Local Distributor or Overseas Factory: What Is the Difference?
A Russian manufacturer can discuss its own production specifications and the products it makes. A Russian distributor or importer can provide a local purchasing route for selected domestic or imported brands. An overseas factory can quote its own models and any available customization, with delivery arrangements agreed for the destination.
These roles can overlap within a business. Evaluate the role attached to the quoted product rather than assuming that every item in a company’s catalog is made at its own factory.
For each quotation, identify:
The company issuing the quote and invoice.
The slide manufacturer, brand, model and origin.
The party responsible for samples, product questions and complaints.
The quantity available or production lead time.
The destination, delivery scope and agreed commercial terms.
Why Slide Thickness Matters: Approximately 1 mm vs. 2 mm
Russian catalogs show several thickness ranges. Slides with the same nominal length and width can differ substantially in thickness.
Published example | Listed dimensions or thickness | Purchasing implication |
|---|---|---|
Steklomed thin option | 26 × 76 mm; 0.8–0.9 mm thick | Check the required thickness interval before selecting it |
MiniLab SP-7105 in MiniMed’s catalog | 26 × 76 mm; 1.0 mm thick | Confirm tolerances and the exact article number |
Apexlab cited 7105 product | 75 × 25 mm; 1.1 mm thick | Match the stated model and dimensions rather than the number alone |
MiniLab SO-4 in MiniMed’s catalog | 26 × 76 × 2 mm | Evaluate the thicker format against the laboratory’s method and equipment |
Do not substitute a 2 mm slide for an approximately 1 mm slide based only on length and width. Consult the requirements for slide holders, printers, stainers, coverslippers and scanners, then assess the proposed product where needed.
These are manufacturer or supplier product specifications, not one universal Russian standard. Also keep slide thickness separate from coverslip thickness; they describe different components of the preparation.
How to Choose Plain, Frosted, Charged and Cavity Slides
Laboratory requirement | Feature to evaluate | Questions for the supplier |
|---|---|---|
Routine microscopy | Plain glass surface | What are the dimensions, thickness, cleanliness and edge specifications? |
Handwritten specimen identification | Frosted marking area | What are the area’s size and side, and which writing method is supported? |
Color-based organization | Colored marking area | Which colors and labeling or printing options are available? |
Enhanced tissue or specimen retention | Positively charged or defined adhesive surface | Which exact coating is offered, and how should samples be evaluated? |
Preparation requiring a depression | One-well or two-well cavity slide | What are the well geometry, slide thickness and intended use? |
A marking area and an adhesion treatment have different functions. A frosted end helps with identification, while a charged or adhesive surface is intended to support attachment in specified applications. Some products combine these features.
For histology, cytology or IHC, use the laboratory’s established method to evaluate the exact model. Assess specimen retention, staining and instrument fit before approving a new supply reference.
Russia Microscope Slide RFQ Checklist
A useful request for quotation defines the complete product and purchasing unit:
Application: Routine microscopy, smears, histology, cytology, IHC, research or teaching.
Product identity: Manufacturer, brand, exact model and supplier article number.
Dimensions: Length × width × thickness, with acceptable tolerances.
Finish: Edge treatment, corner geometry and any cavity or well specification.
Marking: Area size, side, color and writing, label or printer requirements.
Surface: Plain, positively charged or a specified adhesive treatment.
Quantity: Slides per inner box, boxes per carton and total slides required.
Evaluation: Current datasheet, sample availability, lot identification and relevant product documents.
Commercial terms: MOQ, available quantity or production status, lead time, destination and delivery scope.
When searching Russian catalogs, предметные стекла refers to microscope slides and покровные стекла to coverslips. Микропрепараты may describe prepared specimens. State that you require blank slides when that is the intended purchase.
Copyable Request for Quotation
Please quote [quantity] boxes of blank microscope slides for [application], [length × width × thickness] mm, with [tolerances], [edge finish], [corner geometry], [marking area] and [surface treatment]. Please specify slides per box, boxes per carton and total slide quantity. Provide the manufacturer, origin, exact model, current datasheet, sample availability, MOQ and stock or production lead time. Quote delivery to [city and postal code, Russia] with the proposed commercial terms. For an OEM order, please also confirm packaging and artwork requirements.
Frequently Asked Questions
Are All Six Companies Microscope Slide Manufacturers Located in Russia?
No. Steklomed describes Russian slide and cover glass production. MiniMed, DIA-M, Apexlab and Optimum-Lab are included as Russian purchasing channels with published slide references. Chuangxin Medlab is a China-based manufacturer. Confirm the manufacturer of the individual product quoted.
Can Russian Suppliers Sell Slides Manufactured in China?
Yes. For example, Apexlab’s cited 7105 product page states China as the origin. A supplier’s Russian address or website language does not establish that every catalog item is manufactured in Russia.
Are 1 mm and 2 mm Microscope Slides Interchangeable?
They should not be assumed interchangeable. Both thicknesses appear in the cited catalogs. Check the laboratory method and equipment requirements, including the allowed thickness range, before approving a substitution.
Does a 7105 Model Number Guarantee Identical Specifications?
No. Compare the complete manufacturer reference, dimensions, thickness, marking area, edges and packaging. The catalogs reviewed contain similar numerical descriptions attached to different thicknesses and purchasing units.
Does a Frosted End Mean the Slide Is Adhesive?
No. Frosting provides a marking area. Adhesion depends on the stated treatment of the specimen-bearing surface. Request a datasheet identifying both features when the laboratory needs a marking area and enhanced retention.
Can Chuangxin Medlab Quote OEM Microscope Slides for a Russian Buyer?
We offer OEM and private-label options on request. Send the specification, application, packaging, quantity and destination so we can confirm samples, MOQ, production timing and the commercial arrangements for the proposed order.
What Should Be Confirmed Before a Bulk Order?
Confirm the exact model, approved sample, current datasheet, manufacturer, origin, pack quantity, delivery schedule and commercial terms. If your procurement procedure requires particular quality or registration documents, request current documents covering the proposed product.
Request a Microscope Slide Quotation for Russia
Build the shortlist around the laboratory’s specification. Discuss production requirements with a manufacturer, compare defined references through local suppliers, and evaluate the exact sample before changing a model or approving repeat supply.
For a Chuangxin Medlab project, explore our microscope slides and contact our team. Include the slide type, dimensions and tolerances, edge and corner finish, marking area, coating, packaging, order quantity and delivery location so we can prepare a relevant quotation.
